3/4 in. PVC/FKM Pilot Operated Solenoid Valve

CLEARANCE ITEM: 3/4 in. PVC/FKM Series PS Pilot Operated Solenoid Valve

Inlet rating 140 PSI, back pressure rating to 70 PSI, with minimum 5 PSI differential required.

Features:

• Normally closed, in-line design with bubble-tight shut-off.
• Minimum 5 PSI differential required.
• High pressure: Particularly for applications where high back pressures (up to 70 PSI) are required e.g. controlling flow spray nozzles, high pressure chemical injections, etc. Inlet pressure to 140 PSI.
• High flow rates – Cv’s from 5.2 on the 1/2 in. size to 80 on the 3 in. size.
• Unique Design: PTFE Bellows barrier-type dynamic seal prevents leaking of fugitive emissions to the atmosphere.
• Safety/Dependability: Patented Fail-Dry safety design feature provides advance visual warning if seal malfunctions, while permitting valves to continue operating until maintenance can be scheduled.
• Tested to over 1,000,000 cycles in laboratory conditions, with water.
• Versatility: Can be used with all types of solutions including acids, caustics, solvents and chlorine solutions.
• Rugged thermoplastic construction is resistant to both internal and atmospheric corrosion. No metal parts in wetted areas.
• Positive valve closure in the event of electrical failure.
• Energy-efficient 11 watt coil.
• Molded coil and standard DIN connector; designed to meet NEMA 4X.

Plast-O-Matic Part Number: PS075VW11-120/60-PV

Note: Product images shown are for illustration purposes only and may not be an exact representation. To the best of our knowledge, all products are functioning properly when shipped.